Monday, 13 April 2009

Research: James Provost - Business Card Design




Just a great bit of seasonal business card design from one of my favourite technical illustrators, James Provost. Promoting himself, energy efficiency, and giving someone a christmas card all in one go. I know it's April now, but...

Thursday, 2 April 2009

Group Tutorial

Just had my group tutorial. Essentially it was a point at which we could evaluate our progress thus far, and for me it was a chance to discuss my initial thoughts on how i wanted my FMP to run post-Easter. I had been going through Statement of Intent and felt that in all honesty I hadn't strayed too far from what I originally set out to do. The brief I wrote looked into the subject of 'How things work', and while I have not yet directly addressed this issue in great detail, what I have done however was explore the different visual languages within the development of 'explanation'. I had stated that I wanted to explore technical illustration, which I have done to some extent in the diagrammatic work for the NSM brief, narrative, I guess I haven't done enough of this yet (bar Skype perhaps), video/motion graphics - the NSM flash banners earlier in this blog, and ICM have begun to explore this, and even branding - the logotype work exhibits this. However I am going to have to resolve all 4 of these briefs before we come back from Easter so I can focus entirely on my grand, 'comprehensive brief'. For this, I had identified the problem of 'people don't understand how things work', what I hadn't identified however was what 'things' are. I had started collecting lists off people, of objects, systems and actions which they were confused about how they work, and from these I started brainstorming ideas of whole an entire project can be developed from one or more of these 'things'.

Ultimately I want, to use the word again, a 'comprehensive' brief that explores fully the various methods of how these 'things' work via various methods of delivery. What was discussed in the tutorial was the fact that the brief does not have to be comprised of a whole load of interrelated briefs based around the same subject, but can be one brief that is delivered in various ways (print, web etc.) and this can be how it is made 'comprehensive.'

I have already started to develop ideas of what this grand brief will involve, however I will refrain from blogging about it in great detail until I have resolved the work already in progress. The plan over the next 3-4 weeks is therefore;

- Resolve briefs in progress;
  • NSM
  • Logotype
  • ICM
  • Skype

  • - Initial concepts for post-Easter 'comprehensive brief' realised and delivered

    - Initial concepts for design context design developed and realised (delivered?)

    I mentioned that I had been considering developing some more skills in Flash for the next brief (on the back of what I had already begun to investigate), however Fred stated that there really is not enough time for developing software skills such as this, which is quite frightening to think about- where did all that time go? Not good, but alas I will just have to find methods of delivery that are possible in the time available.

    Whilst each of us spoke, the others had to write questions for the person. The one's written for me are shown below, mainly for self-reference.











    ^ Whoa! Someone wasn't paying attention. What brief are they talking about?

    Wednesday, 1 April 2009

    F*@%!!

    Just lost three hours work because the mac I had been working on upstairs crashed. Had nearly completed all the upper case letters on my typeface. > : ( Anyone using the macs in 201 beware. 

    Tuesday, 31 March 2009

    End of Year Show - Old Concept

    I did these a long time ago but just posting them up now. I was originally planning on entering the end of year show, but I completely missed the deadline, and anyway the work was, well, average at best.
    My concept was that the work at the end of year show was only the 'tip of the iceberg' and there was a whole load of effort behind the tiny part of it that people get to see.







    It's funny what you find trawling through your USB stick.
    I do wonder whether this work could have been developed and resolved to a better extent, as the concept isn't too bad I feel, but visually it's quite bland not all that exciting.

    Tutorial w/Fred

    Almost didn't even post on this tutorial. I felt a lot more prepared for this one, and in terms of work a lot of it was evidently in the process of being resolved, all my briefs were in far better detail this time, and I think the tutorial reflected this preparedness.

    Here is the action plan from this tutorial;



    Key points:

    NSM/Casio brief - almost resolved. Not such a difficult task once the brief has been written properly and a context identified. The work however still needs evaluating (via blog), a board needs to be completed and the work put into my portfolio in order to fully resolve the work for this brief.

    Logotype brief - need to identify the deliverables - where is the work going? Business stationary, calendar, signage? Etc. Once these are identified the work can start to be resolved. Also mentioned was the fact that this work could be used to develop my own identity as a designer - while I feel a little cautious of doing so, the work does feel individual to me and is representative of my interests, therefore I may start to bleed it across into my PPD stuff.

    Skype - I began exploring a couple of visual concepts for this brief, however while doing this I re-read the brief and felt that the work wasn't really answering what it asked for. It was asking 'why is Skype better than a normal phone' however my resolution was 'how does Skype work?'. After this tutorial, I will be completing these visual concepts however, as despite not answering the original brief, the work ties in with where my final major is headed, so completed it would be very useful in this regard.

    ICM - Resolved. Higher quality boards need printing and evaluating via blog.

    Europe By Designers - I realise this isn't part of the current body of work and is dp3, however during the tutorial I nearly sh-t myself as I thought the deadline for re-entering this work had passed, however it had not (phew).

    Also and more importantly I mentioned I didn't feel like I had a 'grand' problem to solve, referring to Ken's library signage as an example. Fred however pointed out that I had identified one from quite early on, the idea of 'how things work.' What I needed to identify was what exactly these things are. Seeing as I was going to be on a bus to Newcastle shortly with other people on the course, he suggested compiling some lists of things from people. The lists will help me begin to identify what the final major work will be all about. You can see some of these below;















    Overall the tutorial was very useful, and with 4 briefs well underway I have put myself in a good position for the post-Easter period. Next task is to annotate my original Statement of Intent for the group-based tutorial on Thursday.

    Monday, 30 March 2009

    Type Border Things (Rubbish)


    Today I spent several wasteful hours trying to develop a decorative border for my logotype brief. The purpose behind it was to produce a window sign for the PCB Ltd. (printed circuit board limited) logo. My results are pretty much the worst thing I've done in some time, but I guess it is important to show it and how I developed it .
    Very basically - I took the letter 'k' and began warping its form and removing details until it was essentially unrecognizable. Then I started arranging the forms I was left with, rotating, flipping, pasting etc. but making sure that it sat roughly within the constraints of the circle shown below.











    The overwhelming response from the people I have shown this work to is that it's 'not bad'. I agree its pretty poor, and I think the reason is simply because the forms used in the border really are not that decorative. I think perhaps if they were arranged into a specific form, such as (to use a common decorative logo example) a crest, ie. a pair of lions, a crown, etc. I think that this would both be elegant and would allow the use of the simple circuitry forms to produce both type and image. Exciting, that's if I am able to execute it well.

    Europe By Designers - Submitted! (again)

    I submitted all my work for Europe By Designers again, this time in print quality and with the few extra elements they asked for. Looking forward to seeing how the project develops. I thought I would post up everything I submitted on here;

    BIOGRAPHY:

    Andy Cody is a designer from Liverpool, England. In the summer of 2009 he will graduate from Leeds College of Art with a BA Honours in Graphic Design. However he also has a vested intrest in the areas of technical illustration and information design (on which he based the subject of his dissertation).

    WORK DESCRIPTION:

    The work here forms my repsonse to the question "what does Europe mean to you?"
    My answer is a standard design solution: Europe is a consumer product.
    The result was I created a range of products under the "Europe ©" logo, including; button badges, t-shirts, water bottles and mugs.
    I also developed a body of work following my personal response to Europe: my confusion over the cultures and geographical positions of European countries.

    PORTRAIT:



    BOARDS:









    ---

    Drawing a line under this work, finally! Unless they ask me to adjust anything or re-submit something of course..